1320MINI Posted July 9, 2020 Report Share Posted July 9, 2020 Hi Guy's, Not very clued up, but a customer has a ECU master gear and shift light display. I can get the shift lights to work but i can't get the gear to display. The gear is all set on the ECU and display's the correct gear when moving. Can anyone help with the CAN settings. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 9, 2020 Report Share Posted July 9, 2020 Ok you dont show all the info that is needed but a couple of things I can see: In the ECU config you have both RPM and gear set up in the same stream. But in the ecumaster config you have the RPM and gear set up on different ID's, 3E8 & 3EB. You dont show what ID you have set in the Link ecu but assuming you are using 1000, then both the RPM and Gear ID's in the ecumaster should be set to the same 3E8. In the ecumaster settings, the Gear byte position should be 2. And make sure you check the bit rates to match. You have the ecu set to 1Mbit, but I cant see what the gear display is set to. Quote Link to comment Share on other sites More sharing options...
1320MINI Posted July 26, 2020 Author Report Share Posted July 26, 2020 Thank you for the help with this Adam, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.