MohammadNaser Posted July 18, 2020 Report Share Posted July 18, 2020 So i have this storm blue which you may know it only got 4 ignition drivers and with 6 cyl i tried to use coils with internal igniter so what would be the right connection on this blue box for the coils. am only using a crank sensor, and tried to get the coils connected in pairs but the car didn’t start i got crank signal but didn’t start. Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 18, 2020 Report Share Posted July 18, 2020 Ignition drive 1 = Cyl 1 & 6 Ign drive 2 = Cyl 5 & 2 Ign drive 3 = Cyl 3 & 4 Make sure ignition mode is set to wasted spark and trigger 2 sync mode is set to none. Quote Link to comment Share on other sites More sharing options...
MohammadNaser Posted July 18, 2020 Author Report Share Posted July 18, 2020 This is how i got it set but it was the ignition timing offset, usually it starts with 84- and 328- but now i got to start with 35 degree offset which is strange to me Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 18, 2020 Report Share Posted July 18, 2020 Does it run ok? Is ignition table stable if you rev it with it locked? Can you attach your tune and a triggerscope. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.