Dave Clark Posted July 18, 2020 Report Share Posted July 18, 2020 Good Afternoon, Firstly I'll introduce myself & my cars. I'm Dave and a total Link ECU novice. I'm running an Evo 6 fitted with a Link G4+ and it's an awesome set-up. I didn't map it myself but used a specialist and I can't be happier, My son has got a WRX V7 with a Link G4x, problem is it just won't start......Unless we unplug the cam sensor. The cam / crank sensors have been checked and swapped so this isn't the issue we're thinking. The jumpers are set in the WRX positions, and have read that if they're wrong the ECU won't power-up, but after looking at the G4+ can see this could have this effect so not sure what to make of it, other than to try it next time we go to the car and try again. The AC switch seems to do some mad things like stopping it start when turned on and the cam sensor is unplugged. Please forgive me if this has been asked before but I did a quick search. I've got no files to show but any help would be appreciated. Thank You Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 18, 2020 Report Share Posted July 18, 2020 Check your firmware is at least 6.16.27, if not up date to the latest and it will likely solve your problem. It sounds like you are suffering from the offset being out by 360. Dave Clark 1 Quote Link to comment Share on other sites More sharing options...
Dave Clark Posted July 18, 2020 Author Report Share Posted July 18, 2020 11 minutes ago, Adamw said: Check your firmware is at least 6.16.27, if not up date to the latest and it will likely solve your problem. It sounds like you are suffering from the offset being out by 360. Thank you, I'm assuming it's not been updated to this version as it was purchased before that date. We'll give it a try and see how it goes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.