Tom's r32 gtr Posted July 28, 2020 Report Share Posted July 28, 2020 i need some more knowledgeable eyes to take a look at my ecu settings.. g4+ pnp rb26 single turbo single throttlebody 1300 id injectors r35 coils link can lambda no iac dual walbro 450 stock cas TOM 7.27.2020.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 28, 2020 Report Share Posted July 28, 2020 Yes, it mostly looks ok. A couple of comments: I would turn the 4D fuel table off since you have a single throttle (it has zero's in it anyway) and remove the comment from the memo text about tuning 4D so it doesnt confuse the tuner. Check your fuel pressure cal 4, I suspect that Input value B should be 4.5V, not 5V. Your oil temp doesnt appear to be reading correct. Pull-up resistor needs to be turned on on DI6 for the flex sensor. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.