Harry buscema Posted July 30, 2020 Report Share Posted July 30, 2020 Hi team, Wanting to setup a more aggressive rev limiter(flames and bangs) than stock. I guessing if you use ignition cut you would loose all power mid drift. If anyone could give me advice on what sort of setting would achieve this that would be great, thanks My setup: Link g4+ plug and play Forged Sr20det Quote Link to comment Share on other sites More sharing options...
Adamw Posted July 30, 2020 Report Share Posted July 30, 2020 Aggressive limiter with the SR20 valve train is not a great idea. They can stand up well if built by someone that understands valve train dynamics well but for the typical drift level engine build I would strongly advise against sustained aggressive limiting with a SR20, it is well demonstrated you need very little float before a rocker will jump off the pedestal and that usually results in a valve pushed through the piston at the same time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.