Hyperblade Posted August 1, 2020 Report Share Posted August 1, 2020 I'm looking at putting in an G4X XtremeX into my race car with a custom loom to a K20a Euro R motor and an S2000 gearbox, running Link CAN Lambda (via B Plug) and Link Dash via CAN (via B Plug). It would be awesome if someone could eyeball the following and see if anything stands out as completely wrong. A Loom Pin Name Function Channel Assignment Notes A1 Injection 4 INJ-4 Injector Cyl 4 A2 Injection 3 INJ-3 Injector Cyl 3 A3 Injection 2 INJ-2 Injector Cyl 2 A4 Injection 1 INJ-1 Injector Cyl 1 A5 +14 volt supply +14 V ECU power supply A6 8 Volt 8V 8V Sensor supply TPS, ext map A7 Shield & trigger Ground Shield/Gnd Trigger shield & -VE gnds don't connect shields at engine end A8 Trigger 1 Trig-1 Crank Angle Sensor REF A9 Trigger 2 Trig-2 Exhaust Cam Position Sensor SYNC A10 Ignition 4 IGN-4 Coil Cyl 4 A11 Ignition 3 IGN-3 Coil Cyl 3 A12 Ignition 2 IGN-2 Coil Cyl 2 A13 Ignition 1 IGN-1 Coil Cyl 1 A14 Analog Volt 4 AV4 Fuel Pressure Sensor A15 Analog Temp Input 1 AT1 ECT Engine Coolant Temperature Sensor A16 Analog Temp Input 2 AT2 IAT Inlet Air Temperature Sensor A17 Analog Volt 1 AV1 Oil Pressure Sensor A18 Auxiliary Output 4 AUX-4 Electric Water Pump PWM Low side A19 Auxiliary Output 3 AUX-3 IACV Stock Honda K20a A20 Auxiliary Output 2 AUX-2 Vtec A21 Auxiliary Output 1 AUX-1 VTC A22 Analog Volt 2 AV2 MAP Sensor A23 Digital Input 3 DI3 Ign Switch A24 Ground Out GND Out 0V Sensor Ground To engine block A25 Ground GND ECU power ground To engine block A26 Auxiliary Output 8 AUX-8 Lift Pump Low side A27 Auxiliary Output 7 AUX-7 ECU Hold Power A28 Auxiliary Output 6 AUX-6 Fan Low side A29 Auxiliary Output 5 AUX-5 Fuel Pump Low side A30 Digital Input 1 DI1 Intake Cam Position Sensor A31 Digital Input 2 DI2 Speed Sensor Stock Honda S2000 A32 5 Volt 5V 5V sensor supply A33 Analog Volt 3 AV3 TPS TPS Main A34 Ground GND ECU power ground To engine block B Loom Pin Name Function Channel Assignment Notes B1 Injection 8 INJ-8 Outboard Injector Cyl 4 B2 Injection 7 INJ-7 Outboard Injector Cyl 3 B3 Injection 6 INJ-6 Outboard Injector Cyl 2 B4 Injection 5 INJ-5 Outboard Injector Cyl 1 B5 +14V Aux 9/10 +14 V ECU power supply B6 Temp 3 AT3 Oil Temperature B7 Temp 4 B8 Knock 2 B9 Knock 1 B10 Ignition 8 IGN-8 B11 Ignition 7 IGN-7 B12 Ignition 6 IGN-6 B13 Ignition 5 IGN-5 B14 N/C B15 Analog Volt 6 AV6 Water Pressure B16 Analog Volt 7 AV7 B17 Shield & trigger Ground Shield/Gnd don't connect shields at engine end B18 Auxiliary Output 9 AUX-9 B19 Digital Input 6 DI6 B20 Digital Input 5 DI5 B21 Digital Input 4 DI4 B22 Ground Out GND Out 0V Sensor Ground To engine block B23 Analog Volt 8 AV8 B24 Analog Volt 9 AV9 B25 Ground GND ECU power ground To engine block B26 Auxiliary Output 10 AUX-10 B27 DI 10 / CAN 2 H CAN H CAN H B28 DI 9 / CAN 2 L CAN L CAN L B29 Digital Input 8 DI8 B30 Digital Input 7 DI7 B31 Analog Volt 10 AV10 Steering Angle Sensor B32 Analog Volt 11 AV11 Rear Brake Pressure Sensor B33 Analog Volt 5 AV5 Front Brake Pressure Sensor B34 Ground GND ECU power ground To engine block Is there other sensors worth adding in or at least adding wiring for? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 1, 2020 Report Share Posted August 1, 2020 A few need changing. Hyperblade 1 Quote Link to comment Share on other sites More sharing options...
Hyperblade Posted August 2, 2020 Author Report Share Posted August 2, 2020 On 8/1/2020 at 9:09 PM, Adamw said: A few need changing. <snip> Brilliant, thanks for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.