autolove Posted August 1, 2020 Report Share Posted August 1, 2020 Hello, I'm installing an AEM IAT sensor via the XS expansion loom. Doing this for the first time I want to make sure my assumptions are sound. I need to wire in ground and a 5V signal to the sensor. Would it be good practice to run the sensor ground (green) and Temp 4 (orange) wires from the loom to the sensor? Many thanks for any feedback. Cheers Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 2, 2020 Report Share Posted August 2, 2020 You dont need 5V. Just the AN Temp 4 and Ground straight to the two pins on the sensor. Christoforos 1 Quote Link to comment Share on other sites More sharing options...
autolove Posted August 2, 2020 Author Report Share Posted August 2, 2020 @Adamw Much appreciated. Thank you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.