Braiden Johnson Posted August 10, 2020 Report Share Posted August 10, 2020 Just got the car started today, don’t know a whole lot about tuning, did adjust for a smoother idle on fuel main. It started to overheat so I killed it, it got up to about 236 before I shut it down. It has never overheated as a matter of fact it runs cool,(dual electric fans) larger radiator high volume water pump. Help why the overheat? Where do I start tuning? Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 10, 2020 Report Share Posted August 10, 2020 Are the fans working and set to a suitable activation temperature? You can put the aux in test mode to check they are working. Quote Link to comment Share on other sites More sharing options...
bsh Posted August 13, 2020 Report Share Posted August 13, 2020 Have you choosen the correct temp sensor in software? Quote Link to comment Share on other sites More sharing options...
Braiden Johnson Posted August 27, 2020 Author Report Share Posted August 27, 2020 On 8/9/2020 at 11:29 PM, Adamw said: Are the fans working and set to a suitable activation temperature? You can put the aux in test mode to check they are working. Yes they are switched on On 8/13/2020 at 7:33 AM, bsh said: Have you choosen the correct temp sensor in software? No, we didn’t know about setting correct temp sensor...the gauge showed it hot pretty quick, we have a pusher and a puller and we normally have one unplugged because the car would never reach operating temp with both on. Both were on for initial startup because we were in a hot garage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.