Jimmy 107r Posted September 5, 2020 Report Share Posted September 5, 2020 i have problem cant start the engine, can crank. base map trigger not sure correct or not. any solution? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 5, 2020 Report Share Posted September 5, 2020 I have moved your post into is own topic since it is probably not related to the post about the S15 wiring issue that you posted in. Can you give more info about your problem. What ECU, what car, do you have RPM showing in the software when cranking? Have you done all the pre-start checks in the manual? Quote Link to comment Share on other sites More sharing options...
Jimmy 107r Posted September 6, 2020 Author Report Share Posted September 6, 2020 Pnp g4x s15. Yup all check. Crank shows 150rpm. Trigger setting? s15.pclx S15 trigger.llgx Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 6, 2020 Report Share Posted September 6, 2020 If its showing 150RPM then it suggest the trigger is ok. A couple of things I noticed in your map: Fuel is turned off. IAT is reading 100°C MAP hasnt been calibrated. Trigger offset looks wrong. Battery voltage only shows 7.2V when the map was saved. Quote Link to comment Share on other sites More sharing options...
Jimmy 107r Posted September 6, 2020 Author Report Share Posted September 6, 2020 After i check this then? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 6, 2020 Report Share Posted September 6, 2020 If you fix those basics then it will most likely run. If it doesnt please give more detail about your engine and a log of it cranking. Quote Link to comment Share on other sites More sharing options...
Jimmy 107r Posted September 6, 2020 Author Report Share Posted September 6, 2020 Base trigger also? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 6, 2020 Report Share Posted September 6, 2020 Sorry, I dont know what your question is. You need to check the base timing with a timing light. Quote Link to comment Share on other sites More sharing options...
Jimmy 107r Posted September 6, 2020 Author Report Share Posted September 6, 2020 injector 3 not working after store map to ecu. before 2 and 3 not working now only after store. injector no problem S15 trigger2.llgx s15.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 6, 2020 Report Share Posted September 6, 2020 How do you know injector 3 is not working? Is this when you are using the injector test function or when cranking or is the engine running now? Please attach a log of it cranking as I asked earlier. Quote Link to comment Share on other sites More sharing options...
Jimmy 107r Posted September 6, 2020 Author Report Share Posted September 6, 2020 test function PC Datalog - 2020-09-6 6;39;13 pm.llgx Nissan S14-15 G4X Xtreme Plugin.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 6, 2020 Report Share Posted September 6, 2020 If injector 3 doesnt work doing the injector test function then you have a wiring issue. Your log only shows 0.5second of cranking so it isnt really enough to give us a good idea that everything is ok, but all the basics appear to be there. Does your timing look correct when you are cranking? What size injectors? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.