StavrosSS Posted September 7, 2020 Report Share Posted September 7, 2020 hi to everyone I just installed my link mxs strada on my skyline r34 gtr with link g4+ I did the can setup as per manual and everything worked fine I was then playing around in the race studio software and i tapped on the display section Then I selected transmit After that everything dissappeared on the dash How can i restore everything back to the original settings? Thanks in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 7, 2020 Report Share Posted September 7, 2020 I have attached from my personal files what I think was the original Link config - I normally use a more customised version. To use this, go to the configuration page in RS3 and select "import" then import this file. Once its finished importing you can place a check mark in the box beside this config and hit transmit. MXS 1.2 Strada - Link Config.zconfig Quote Link to comment Share on other sites More sharing options...
StavrosSS Posted September 7, 2020 Author Report Share Posted September 7, 2020 thanks Adam i will try it and let you know it worked like a treat thanks again any customisations you think that might be useful to me please let me know Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 8, 2020 Report Share Posted September 8, 2020 10 hours ago, StavrosSS said: any customisations you think that might be useful to me please let me know It is very much down to user preference. Most of the cars I do are circuit cars so I will typically have a warm-up screen for keeping an eye on vitals during start-up and then a racing page where I put as little on the display as possible to keep it easy to read at a glance and so the driver doesnt have to worry about pressures/temperatures etc. Anything important that we want the driver to take action with you do with alarms and messages. For a road car I would suggest just looking though all the display layouts available and find one you like. The latest versions of RS3 have more options for changing colours of text and adding icons etc too. Quote Link to comment Share on other sites More sharing options...
StavrosSS Posted September 8, 2020 Author Report Share Posted September 8, 2020 Thanks alot for your time... Much appreciated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.