The green light Posted September 7, 2020 Report Share Posted September 7, 2020 Hi guys I am having trouble trying to work out why my two ignition drivers and injection drivers will not come up as on or active in the configuration screen. The ECU hold is ok and I am getting a crank I have checked that the injectors and the coil are getting power and that the wires from the ECU to the injectors and coil are good. The car was running and then I wired up the red counter oil pressure light and charge light to the dash, I then ran the car again and everything seemed fine but the next day I could not get it to start. Any thoughts on what else should I be checking? Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 8, 2020 Report Share Posted September 8, 2020 It is normal for the status runtimes to show off all the time for injectors and ign - they only show active when the drives are assigned as aux outputs. Do you have RPM showing in the software when cranking? Do the injectors click when you set them to test mode? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.