richie Posted September 17, 2020 Report Share Posted September 17, 2020 hey guys im not getting any spark at all unless i do an ignition test. i have the tarks 12 - 1 trigger all setup . Can anyone help?!!! G4X s14/15 plug in Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2020 Report Share Posted September 17, 2020 Are you sure it is set up right? From a quick google Taarks dont actually make a 12-1 wheel, they make 36-2, 24 or 12 tooth. Can you attach your tune. Quote Link to comment Share on other sites More sharing options...
richie Posted September 17, 2020 Author Report Share Posted September 17, 2020 https://www.efisolutions.com.au/hall-sensor-kit-sr20-s13-180sx-s14-s15 https://www.efisolutions.com.au/assets/files/Instruction_Manuals/200008v2.pdf S14a sr20.pclx Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2020 Report Share Posted September 17, 2020 Yeah that is a 12 tooth wheel, not 12-1. But your set up is correct. You map was showing quite a few trigger errors when you saved it so it does appear that it is not happy with something trigger related. You you do a triggerscope while cranking and attach the file here. Here is a quick video showing how to do the scope: https://1drv.ms/v/s!AiYbYlZQuRHPmidU5V2CmTcv6t2y?e=JfgyqJ Quote Link to comment Share on other sites More sharing options...
richie Posted September 17, 2020 Author Report Share Posted September 17, 2020 heres the log TriggerScopeLogs14a.llgx 7 minutes ago, richie said: heres the log TriggerScopeLogs14a.llgx 92.16 kB · 2 downloads Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2020 Report Share Posted September 17, 2020 Ok, something is very wrong there. You should see nice evenly spaced teeth all the same size on trigger 1 and just a single tooth on trigger 2 once every 12 trig 1 teeth. Im not sure what could cause that - possibly a wiring problem, or the sensor is faulty, or possibly something random like some of those stainless countersunk screws are actually magnetic and triggering the sensor? Start by reconfirming the wiring - The home wire should go to Link trigger 2 and the "trigger" wire should go to Link trigger 1. If you're happy the wiring is correct then I think its going to need some input from Taarks. Quote Link to comment Share on other sites More sharing options...
richie Posted September 17, 2020 Author Report Share Posted September 17, 2020 yea ive triple checked the wiring today........ I might give Taarkz a call tomorrow. cheers for the help! Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2020 Report Share Posted September 17, 2020 Actually, just looking at that scope again, it almost looks to me like they have some of the magnets fitted in backwards. You're meant to have 12 magnets all facing the same polarity (ie all north poles facing one way), then the 13th oddly spaced magnet is meant to be facing the opposite polarity. It looks to me like youve possibly got 4 magnets facing one way and 9 facing the other way. If youve got an old school compass or maybe another magnet you could confirm that yourself (not sure if an iphone compass would work, but maybe). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.