WillPowell Posted September 17, 2020 Report Share Posted September 17, 2020 Have both triggers, rpm, tps, and map but injectors still will not pulse during cranking. They will pulse during an injector test and have good power during cranking ive provided a log from this morning. Log 2020-09-17 12;02;46 pm.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 17, 2020 Report Share Posted September 17, 2020 The log suggests there is injector PW being commanded. The battery voltage and RPM is very low though - was this log taken with a flat battery? Is there possibly no ground connection between ECU and engine? The Log shows it came from a plug-in ECU, what model ECU and car? Does it show signs of life if you add fuel via starting spray? Quote Link to comment Share on other sites More sharing options...
WillPowell Posted September 18, 2020 Author Report Share Posted September 18, 2020 The battery definitely could use a charge. It will hit off of starting fluid all grounds are good but I will triple check them first thing in the morning. Its a plug in 2jzgte g4+ ecu in a 4wd Toyota pickup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.