VtrSp1 Posted September 30, 2020 Report Share Posted September 30, 2020 @Adamw i have wired to the engine harness a AtomX in a Peugeot 106 8V NFW engine. The car have only the crank sensor (Vr- reluctor) and the crank wheel is 60-2 tooth . I have do a few crank and log the oscilloscope signal from trigger 1 I attach the calibration, a log with crank and the oscilloscope Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 30, 2020 Report Share Posted September 30, 2020 What is the question? Set up looks ok to me. Quote Link to comment Share on other sites More sharing options...
VtrSp1 Posted October 1, 2020 Author Report Share Posted October 1, 2020 @Adamw I need only a check on the setup trigger1 and wiring of trigger 1 ...if looks ok for you i can try to start the engine :-) Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 1, 2020 Report Share Posted October 1, 2020 yep, it all looks happy to me. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.