Poseidon Posted October 8, 2020 Report Share Posted October 8, 2020 Can I disable an Aux6 boost solenoid with a digital input?what possibilities would there be to deactivate the valve using a switch Quote Link to comment Share on other sites More sharing options...
dx4picco Posted October 8, 2020 Report Share Posted October 8, 2020 you can make a multiple boost table, and the second or trhird table would be activated by a DI of your choice, and you put only 0 in it. so you run only on wastegate spring Quote Link to comment Share on other sites More sharing options...
Poseidon Posted October 8, 2020 Author Report Share Posted October 8, 2020 Have vacuum cans.at 0 there is just no regulation, but there is pressureoh, could enter 100 Quote Link to comment Share on other sites More sharing options...
dx4picco Posted October 8, 2020 Report Share Posted October 8, 2020 putting 0 is the same as de-activating/disable an output. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.