bmw n54 trigger problem

[Spyrosgeo]

Hi,

I own a n54 bmw engine. 

I have replace direct injectors with indirect injector.

All triggers sensors are hall .

On crank it has 60-2 teeth .

On every cam it has 3 teeth .

Also, i have found trigger offset .

Vanos works correctly with user defined .

Now i wonder it trigger edge is correct ( maybe it is ).  On trigger 2 if cam level is correct when i have 3 teeth ?

I send trigger scope .

Until 6500rpm all is running good.After 6500rpm it does a deep cut ,appear rpm limit rpm while limit is 8500rpm and increace trigger error. Have a look at log.

bmw n54 rpm problem.llg

[Adamw]

Your trigger settings look like they should be ok for that trigger pattern.  Can you do a triggerscope at about 6500RPM and attach the actual log file here.