[email protected] Posted October 17, 2020 Report Share Posted October 17, 2020 Good morning. Can a Knock Link device as shown in the picture be connected to a and Link g4+storm blue. The blue Ecu I have has only an "A" 34 pin connector. Why would I use it. Would it connect to a 3sge beams open knock sensor? Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 17, 2020 Report Share Posted October 17, 2020 The Storm blue has knock control built in. The knock link is a very old knock warning device - I have no idea how well they work since it is from long before my time, but if you want to use it it will need to be connected to its own dedicated knock sensor. Quote Link to comment Share on other sites More sharing options...
Jayden1jz Posted December 2, 2020 Report Share Posted December 2, 2020 Does the storm blue really have onboard knock control? Do i still need a knock detection device or can the ecu detect and control? Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 3, 2020 Report Share Posted December 3, 2020 9 hours ago, Jayden1jz said: Does the storm blue really have onboard knock control? Do i still need a knock detection device or can the ecu detect and control? Yes the storm blue has internal knock control. The knock input pin is shared with the DI3 pin so the only limitation is you can only have one or the other. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.