Gotty101 Posted October 31, 2020 Report Share Posted October 31, 2020 Hi all, just before I make a mistake can I check something. On my loom I'm running the following sensors that have a ground. Crank (2 wire), cam (2wire), TPS, Map, air, coolent, fuel pressure, oil pressure, flex fuel sensor, two speed hall sensors (front wheel and rear axle) Should all these go to sensor ground even though some are 5v 12v or internal pullup powered? Many thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 31, 2020 Report Share Posted October 31, 2020 Yes, I would connect all those to sensor ground. Quote Link to comment Share on other sites More sharing options...
Gotty101 Posted November 1, 2020 Author Report Share Posted November 1, 2020 Awsome thank you for confirming that Adam Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.