rot62 Posted November 3, 2020 Report Share Posted November 3, 2020 Hi I have a nissan v8 using a SNZ ecu and the multi tooth is setup as 4+1 crank trigger setup. So there are 5 teeth on the crank, 4 teeth are at 90 deg from each other and the sync tooth is about 12 deg out from one of the 4 at 90 deg. Question is how do I set up this in a G4X? or can i cut off the sync tooth and one of the other four and do a Multi/ missing setup ie 4-1 Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted November 3, 2020 Report Share Posted November 3, 2020 Try yamaha wave runner mode. It is a 4+1, Im not sure on the exact angle of the extra tooth but it looks around 14 to 15deg. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.