Jump to content

Ignition setup vs Sudden Acceleration...


GT_maxwell

Recommended Posts

Hi which Ignition table that i should look at for ING vs TPS ( sudden Acceleration by % ), which i have the base Ignition map and at some sudden load ( rpm range ), I will need to add some Timing to burn off the additional fuel which is been upload by the Sudden enrichment on the G4+ plugin Map..

 

The ECU that we are using is EVO7 PCB V1.5 Plugin

Link to comment
Share on other sites

It would be pretty unusual to need more advance during acceleration in an evo.  Typically they need retard under acceleration to prevent knock, some of this may be due to the low resolution crank trigger wheel wjhich will cause extra advance during acceleration.

However, if you really want more advance, then turn on a 4D ign table, set it to always on, the put TPS delta on one axis.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...