Josht86 Posted December 14, 2020 Report Share Posted December 14, 2020 Have a g3 in a sohc falcon speedway car. Basic set up with coil and dizzy. Issue is I'm getting spark from coil and is constant but not coming through dizzy. Dizzy is set right and locked off. Have tried through 30 degrees to -30 and nothing. What can be the issue? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted December 14, 2020 Report Share Posted December 14, 2020 Whats it got for an ignitor? Is it the grey TFI module? If you wind the engine over by hand to about 20BTDC #1cyl, then pull the dizzy cap off, is the distributor rotor nicely centered under the # 1 post? Trigger offset will need to be somewhere close to correct also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.