NizKid Posted January 1, 2021 Report Share Posted January 1, 2021 Hi Im wanting to do the CAN hardware mod to my LEM G3 pcb any info on the procedure would be much appreciated Kind regards Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 1, 2021 Report Share Posted January 1, 2021 There are two different PCB revisions in the G3 LEM. Can you open a map from your ECU in PC Link and go to >help>ecu information and tell me the main board revision. Also, as well as the hardware mod Im pretty sure you will need to update to G4 firmware to get the CAN to work. Quote Link to comment Share on other sites More sharing options...
NizKid Posted January 7, 2021 Author Report Share Posted January 7, 2021 Thanks for your reply the board revision is 1.5 Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 7, 2021 Report Share Posted January 7, 2021 Have sent you a PM. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.