B3mwe Posted January 3, 2021 Report Share Posted January 3, 2021 Hi all i think im being dense as trying to add my oil temp (2 wires) and oil pressure in 3 wire the 2 wire i cant seem to get it to work correctly and what settings im going in via the expansion connector so nice nd easy so i thought Quote Link to comment Share on other sites More sharing options...
Adamw Posted January 3, 2021 Report Share Posted January 3, 2021 One pin of the temp sensor goes to a AN Temp input, the other pin to sensor ground. The pressure sensor connects to a AN volt input, 5V, and sensor ground, most sensors use the pinout below, but check your datasheet to confirm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.