jycheung Posted February 4, 2021 Report Share Posted February 4, 2021 Does anyone have injector characterization tables for ID725 for linkecu? trying to setup injector deadtimes and short pulse width adder tables. Thank you in advance. Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 4, 2021 Report Share Posted February 4, 2021 Tables attached, deadtime table will need to be set to 3D before importing this. I can only find SPWA data for 400kpa but it is likely better than nothing. If using modeled mode the flow rate should be about 715cc @300kpa. Short Pulse Width Adder ID725.lte INJ Deadtimes ID725 300kpa.lte Quote Link to comment Share on other sites More sharing options...
jycheung Posted March 11, 2021 Author Report Share Posted March 11, 2021 Thank you Adam. Very helpful! Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 23, 2021 Report Share Posted March 23, 2021 They are available. You need to be logged in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.