SDHVW Posted February 16, 2021 Report Share Posted February 16, 2021 Hello, need a little help with creating a fuel table for an EJ25 NA engine, I started using the preset setup for a WRX as the engine I am using has VVT (cam switch not ACVS) and e throttle. Any help would be appreciated. Cheers Subaru EJ253 COASTVW Ethrottle possible.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 16, 2021 Report Share Posted February 16, 2021 The V9 fuel table will probably be the closest if you have no TGV. If you have TGV the the V10 fuel table will prob be better (will need 4D table as well with TGV). I've attached you map below with V9 fuel table imported and the boost cells removed. SubaruEJ253COASTVWEthrottlepossible V1.1.pclr SDHVW 1 Quote Link to comment Share on other sites More sharing options...
SDHVW Posted February 17, 2021 Author Report Share Posted February 17, 2021 Cheers Adam, Given that a whirl this morning and she's not firing up, its like a timing issue as getting a pop now and then. I was able to record a log if you could have look with your expert eye that would be most appreciated. Cheers Sean Log 2021-02-17 9;40;25 am.llg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.