EricW Posted May 27, 2012 Report Share Posted May 27, 2012 When using an external Knock Amplifier in VX Windowed mode and using the DI4/An Volt 2 input as the Digital Knk Feedback, the knock feedback doesn't work; the Runtime values report ERR: DI Feedback Swapping the wiring with another digital input and reconfiguring works. In my case, I swapped the DI4/An Volt 2 (Digital Knk Feedback) with DI2 (GP Input), flipped configurations between the ports, and everything is great! Quote Link to comment Share on other sites More sharing options...
Simon Posted May 27, 2012 Report Share Posted May 27, 2012 We are looking in to this. Any chance you could send a map for us to check on as well. Quote Link to comment Share on other sites More sharing options...
EricW Posted May 28, 2012 Author Report Share Posted May 28, 2012 We are looking in to this. Any chance you could send a map for us to check on as well. Sure Simon, I can send an old map. Email address? -Eric Quote Link to comment Share on other sites More sharing options...
Simon Posted May 28, 2012 Report Share Posted May 28, 2012 [email protected] Quote Link to comment Share on other sites More sharing options...
Simon Posted May 28, 2012 Report Share Posted May 28, 2012 You are totally correct. Your work around is also what we would recommend. Thank you for the feedback. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.