That_gtr_kid Posted April 11, 2021 Author Report Share Posted April 11, 2021 Injectors and ignition weren't active while I was cranking the motor and once it reconnect it all went back to inactive Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 11, 2021 Report Share Posted April 11, 2021 Youve still only got 7.7V battery voltage showing on the last screenshot. You need to fix that so it doesnt disconnect when cranking. It should not drop below about 10.5V if everything is good. Quote Link to comment Share on other sites More sharing options...
That_gtr_kid Posted April 11, 2021 Author Report Share Posted April 11, 2021 I fixed the battery issue and now everything goes active while I am cranking the motor but still no start. I am noticing that as soon as I start to crank it the fuel pump goes red and the coils stay inactive but only for a rew seconds if cranking then the fuel pump goes green and active and so do the coils Quote Link to comment Share on other sites More sharing options...
That_gtr_kid Posted April 11, 2021 Author Report Share Posted April 11, 2021 I'm getting engine speed now also it reads 203 rpm BADLIZD ecu.pclx heres an updated map if it helps Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 11, 2021 Report Share Posted April 11, 2021 Check base timing with a timing light. The fuel table doesnt look sutaiblke for modelled fuel equation - I would suggest multiply the whole fuel table by 2 as a starting point. Turn off IAT trim. Copy the charge temp approximation table example out of the help file. You should then be somewhere in the ball park. Quote Link to comment Share on other sites More sharing options...
That_gtr_kid Posted April 11, 2021 Author Report Share Posted April 11, 2021 Other the using a calculator to do the math for the fuel tables how do I apply the new values to it? The last time I tried it changed every cell to that one value I entered? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 11, 2021 Report Share Posted April 11, 2021 Click the top left corner of the fuel table so that the whole table is selected, then type "*2" and hit enter. That_gtr_kid 1 Quote Link to comment Share on other sites More sharing options...
That_gtr_kid Posted April 11, 2021 Author Report Share Posted April 11, 2021 Well looks like I'll have to get a timing light I guess... I'll let ya know once I have the base timing set. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.