jbsw Posted April 14, 2021 Report Share Posted April 14, 2021 Just switched over to E85 i can see the hertz from 50-150, temp reads, but on the % ethanol it only reads 0, what is needed to make that read 0-100? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 14, 2021 Report Share Posted April 14, 2021 It is in error condition in that photo so will default to whatever is set as the error value. What is the frequency showing on the flex DI? Quote Link to comment Share on other sites More sharing options...
jbsw Posted April 14, 2021 Author Report Share Posted April 14, 2021 1 minute ago, Adamw said: It is in error condition in that photo so will default to whatever is set as the error value. What is the frequency showing on the flex DI? Was not plugged in at the time so that’s why it reads error, when plugged in and running the frequency was at 119hz but still reading 0% on the percentage reading Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 14, 2021 Report Share Posted April 14, 2021 Attach your map and a log showing this, I will take a look. Quote Link to comment Share on other sites More sharing options...
jbsw Posted April 14, 2021 Author Report Share Posted April 14, 2021 10 minutes ago, Adamw said: 1g dsm 1300x fp green 30 psi 4-10-21 rev 7 +2 timing.pclr 1300x +2deg log.llg Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 14, 2021 Report Share Posted April 14, 2021 This log shows 0Hz on DI7 all the time. A valid flex sensor frequency is 50-150Hz. Quote Link to comment Share on other sites More sharing options...
jbsw Posted April 14, 2021 Author Report Share Posted April 14, 2021 It should be under DI2 Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 14, 2021 Report Share Posted April 14, 2021 You've got both DI2 and DI7 set to ethanol sensor. Turn off DI7 in that case. Quote Link to comment Share on other sites More sharing options...
jbsw Posted April 14, 2021 Author Report Share Posted April 14, 2021 That was it, knew it was something dumb. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.