FredMendes Posted April 19, 2021 Report Share Posted April 19, 2021 Hi. I asked support but maybe gere is faster. Does the g4x (Nissan 300zx plug and play ECU) control one eletrônic throttle? In the pic it says it does, can someone confirm this? Do i need any external controler? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted April 19, 2021 Report Share Posted April 19, 2021 Dual E-Throttle control for G4X ECUs is coming in release 6.20 (out very soon). On the storm you will need two external H-Bridges (https://dealers.linkecu.com/G4RET?quantity=1) and on the Xtreme or Fury you can use the internal driver for one E-Throttle and an external for the other. Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 19, 2021 Report Share Posted April 19, 2021 The 300Z plug-in ecu doesnt have the Aux 9/10 pins available for direct E-throttle connection. You can use the external module or if you havent purchased the ecu yet your dealer could place a special order with Link for one to be hand modified with some flying leads added to make aux 9/10 available. Quote Link to comment Share on other sites More sharing options...
FredMendes Posted April 22, 2021 Author Report Share Posted April 22, 2021 On 4/19/2021 at 11:51 PM, Adamw said: The 300Z plug-in ecu doesnt have the Aux 9/10 pins available for direct E-throttle connection. You can use the external module or if you havent purchased the ecu yet your dealer could place a special order with Link for one to be hand modified with some flying leads added to make aux 9/10 available. Thanks Adam. Would it be possible to either use 2 external modules or to hand modify to control 2 e-throttles? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 22, 2021 Report Share Posted April 22, 2021 You can use 2 external modules or the one internal and one exturnal. You will need to confirm you have enough inputs/outputs as two throttles and a pedal will need a lot of IO. Quote Link to comment Share on other sites More sharing options...
FredMendes Posted April 23, 2021 Author Report Share Posted April 23, 2021 9 hours ago, Adamw said: You can use 2 external modules or the one internal and one exturnal. You will need to confirm you have enough inputs/outputs as two throttles and a pedal will need a lot of IO. Thanks again. Allready spoke with one of your dealers to have one ECU modified. Will decide later on if going 1 e-throttle or 2 with the external controler. Currently have 2 expansion looms for: 2egts2, iats, Oiltemp, oil pressure, Boost, 2x , water temp, 2 widebands. Should be enough no? Quote Link to comment Share on other sites More sharing options...
Adamw Posted April 23, 2021 Report Share Posted April 23, 2021 You will need 2 analog inputs for the pedal, 2 analog inputs per throttle body and 2-3 aux outputs per throttle body. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.