Tabz Posted May 5, 2021 Report Share Posted May 5, 2021 hi , i would like to wire up a boost solenoid with a switch to run high and low boost(gate pressure), was wondering what aux have people used and any wiring diagram would be helpful. Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 5, 2021 Report Share Posted May 5, 2021 The Evo 1 should have a factory wastegate solenoid, most users just connect the new solenoid in place of the original. The original is connected to Aux 4. If your original wiring is gone, then pin 40 is Aux 4. Connect one solenoid wire to switched +12V and the other solenoid wire to Aux 4. Quote Link to comment Share on other sites More sharing options...
Tabz Posted May 5, 2021 Author Report Share Posted May 5, 2021 thank you sir much appreciated:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.