Denmark Posted May 9, 2021 Report Share Posted May 9, 2021 Hi All Im trying to setup boost by gear, but cant get the speed input working Speed input from a dccdpro vss is used to make the speed signal, and its connected to DI3, can anyone see what the probelem is ? I belive if i open a gauge showing wheelspeed or HZ that i would be able to see the something on the gauge, and its not showing anything with this set up Anyone ? Thanks steffenrallybilrev10.pclr Quote Link to comment Share on other sites More sharing options...
Denmark Posted May 9, 2021 Author Report Share Posted May 9, 2021 I now Got speed showing and calibrated to show the right speed , when i open a gear gauge it just stays in first , so it does not know what gear im in .... Quote Link to comment Share on other sites More sharing options...
Confused Posted May 9, 2021 Report Share Posted May 9, 2021 Under Chassis and Body -> Gear Detection, I use "Gear Detection Type" of "User Defined", then in the Gear Ratio Table, I put the value that shows up in the Runtime Values window (F12, go to the "Misc" tab, and look for the "Gear Ratio Calc" value) for the current gear. Repeat this process for the rest of your gears. I find this much more reliable, and quicker to set up, than trying to get it to automatically detect the gear ratios. Quote Link to comment Share on other sites More sharing options...
Denmark Posted May 10, 2021 Author Report Share Posted May 10, 2021 Thank you , I got it working Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.