k fuku Posted May 16, 2021 Report Share Posted May 16, 2021 Trouble with boost table switching The switching condition is a digital switch. When I switch to boost table 2, the boost target value table itself becomes active, but it does not become the target value entered in table 2, but becomes zero. Is there a mistake in the setting? Quote Link to comment Share on other sites More sharing options...
Vaughan Posted May 16, 2021 Report Share Posted May 16, 2021 Can you attach a log of this happening? Quote Link to comment Share on other sites More sharing options...
k fuku Posted May 16, 2021 Author Report Share Posted May 16, 2021 2021年5月17日午前6時11分、ヴォーン氏はこう語った。 この出来事のログを添付できますか？ https://drive.google.com/file/d/1vJ5kvGh0mJTmW9ibRehDbndhtr8sGX6G/view?usp=drivesdk 2021年5月17日午前6時11分、ヴォーン氏はこう語った。 この出来事のログを添付できますか？ https://drive.google.com/file/d/1vJ5kvGh0mJTmW9ibRehDbndhtr8sGX6G/view?usp=drivesdk おはようございます。ちゃんとしたログが残ってました。 過給圧目標テーブル2には190～200という値があるのですが、これに切り替えるとゼロになってしまいます。 このログの後半では、テーブルを切り替えずにテーブルを1つ作成し、目標値を190に書き換えてデータを取得しました。1テーブルでも問題ありません。 Quote Link to comment Share on other sites More sharing options...
k fuku Posted May 17, 2021 Author Report Share Posted May 17, 2021 一つの過給圧目標テーブルの軸数を増やして切り替えてみました。 Quote Link to comment Share on other sites More sharing options...
Vaughan Posted May 20, 2021 Report Share Posted May 20, 2021 I've just had a play with an old copy of your basemap and can't seem to replicate it on the bench, do you have a copy of your map from when it was happening? was it happening consistently or only sometimes? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.