cruz177 Posted May 25, 2021 Report Share Posted May 25, 2021 Good morning I want to put a bosch solenoid in any aux 1-2 input, the problem with this solenoid is that I need to reverse the polarity so that it returns to its position once it is activated. Is it possible to do it directly from the link or will I need additional hardware? Thanks Quote Link to comment Share on other sites More sharing options...
Adamw Posted May 25, 2021 Report Share Posted May 25, 2021 Yes, you will need to do it with a relay. You can use a single DPDT relay if you can find one, or two SPDT relays. cruz177 1 Quote Link to comment Share on other sites More sharing options...
cruz177 Posted June 9, 2021 Author Report Share Posted June 9, 2021 good morning Finally I used the attached schematic. The problem I have is that I do not know how to configure that when I activate DI1 (antilag arming) the aux1 relay is activated for a period of 4 seconds approx and when the antilag is removed (D1 deactivated) the aux2 relay is activated to return the solenoid to its initial position some help? Quote Link to comment Share on other sites More sharing options...
cruz177 Posted June 9, 2021 Author Report Share Posted June 9, 2021 Well I answer myself saying that it is possible The AUX 1 and AUX2 input must be adjusted under the antilag arming condition and under a second virtual aux condition This virtual aux is linked to gp delay in which we can enter a time to activate-deactivate to our liking Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.