Nick71 Posted July 16, 2021 Report Share Posted July 16, 2021 Hi, just want to confirm that a rotary cal switch will work with a g4x plug in? Also what is the best way to wire one in? Quote Link to comment Share on other sites More sharing options...
dx4picco Posted July 16, 2021 Report Share Posted July 16, 2021 You will need to have 3 wires +5v on one side ANvolt in the middle Sensor ground on the other side. As long as you have an ANvolt input available you will be able to have it Quote Link to comment Share on other sites More sharing options...
Nick71 Posted July 16, 2021 Author Report Share Posted July 16, 2021 Thanks, that’s what I thought but wanted to double check. Quote Link to comment Share on other sites More sharing options...
dx4picco Posted July 16, 2021 Report Share Posted July 16, 2021 What do you want to setup with that switch? Quote Link to comment Share on other sites More sharing options...
Nick71 Posted July 16, 2021 Author Report Share Posted July 16, 2021 Boost settings and dbw sensitivity if possible. (wet setting) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.