Tedfowler Posted August 28, 2021 Report Share Posted August 28, 2021 Hello everyone I’ve got a loom and link monsoon ecu for my rs turbo I was wondering if I was able to run a 36-1 trigger wheel for the crank and a 2 point cam trigger I’m grateful for any advice provided cheers Ted Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 28, 2021 Report Share Posted August 28, 2021 Provided the two cam teeth are not positioned exactly opposite each other (180 deg apart) the G4X would be able to use them. If they are exactly opposite each other you will have to remove one. Quote Link to comment Share on other sites More sharing options...
Tedfowler Posted August 28, 2021 Author Report Share Posted August 28, 2021 48 minutes ago, Adamw said: Provided the two cam teeth are not positioned exactly opposite each other (180 deg apart) the G4X would be able to use them. If they are exactly opposite each other you will have to remove one. Thanks Adam and no they’re not opposite here’s a photo of them Quote Link to comment Share on other sites More sharing options...
Adamw Posted August 28, 2021 Report Share Posted August 28, 2021 Yes that will be fine. The cam pulse window sync method will work with that. Once you have the engine ready to run you will need to do a trigger scope while cranking and attach it here and we will advice some settings for it. Quote Link to comment Share on other sites More sharing options...
Tedfowler Posted September 12, 2021 Author Report Share Posted September 12, 2021 That’s fantastic Adam i will be In touch won’t be for a while haha as I have a few projects on the go but I’m glad it will work thanks again for your advice Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.