SR Tuned Posted September 7, 2021 Report Share Posted September 7, 2021 I attached a few images for the OEM engine control of a Toyota 2AZ-FE I need a little help identifying the corresponding connections for my Link G4X Fury. Any help is appreciated. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 7, 2021 Report Share Posted September 7, 2021 Throttle body (toyota usually have their +/- opposite of everyone else so I would guess this is the same): Aux 9 Aux 10 E2 Sensor ground VTA2 TPS Sub Vc 5V VTA1 TPS Main Pedal: EP2 Sensor ground VPA2 APS Sub EP1 Sensor ground VCP2 5V VPA1 APS Main VCP1 5V Maf not needed. Coolant temp not polarity sensitive, one wire to AN Temp, other to Sensor Gnd. Crank: Trig 1 Sensor Gnd Knock not polarity sensitive, one wire to knock 1, other to Sensor Gnd. Cam: Trig 2 Sensor Gnd Quote Link to comment Share on other sites More sharing options...
SR Tuned Posted September 9, 2021 Author Report Share Posted September 9, 2021 Thank you Quote Link to comment Share on other sites More sharing options...
SR Tuned Posted September 27, 2021 Author Report Share Posted September 27, 2021 Is there possible a base map for a Toyota 2AZ-FE Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.