Jump to content

help with fans


Recommended Posts

Hola, los ventiladores están configurados, salida auxiliar 2 (ventilador eléctrico 1), a 1000rpm funciona correctamente, 92 grados mis dos ventiladores eléctricos comienzan a funcionar. pero el coche alcanza los 98 grados. Miro el ventilador y a esa temperatura los ventiladores se detienen. Hago la prueba auxiliar 2 y funcionan correctamente. Si no arranque el coche, pero lo encendí el motor, mi linkg4 lo enciende marca 97 grados pero los ventiladores no funcionan, estoy esperando tu ayuda y gracias

lo siento por mi inglés

Captura de pantalla (9).png


Link to comment
Share on other sites

I dont see any problem in your settings.  Aux 2 should turn on at 92°C and keep running until engine temperature is below 87°C - assuming engine is running.  If the ECT is high when you turn the ignition on, then the fans wont switch on until the engine is running.  

Can you check the runtimes screen next time the fan is not working when it should be to see if the aux 2 status shows ON.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...