Jump to content

Link g4+ , AIM Strada dash - different values.


Recommended Posts


I'm after some help and advice for a complete amateur who likes nothing better than to fiddle with the settings  :-)

I have had a fuel pressure sensor added to my set up and on pc link the values are all correct, however when I add the new data feed into the CAN stream for the Strada dash I get completely different numbers on the dash. I've attempted to duplicate the set up from a similar sensor however I just can't get the numbers displayed on pc link to appear the same on the dash. 

I cant seem to get around the problem of getting the dash to display the numbers that are there - somewhere (and I cant find where) something is changing the numbers and I cant figure out why

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...