Ej205 trigger help

[zouyiyu]

Hello everybody, I got  a strange ej205 engine, maybe it is a ej20X/Y.    I tried to swap it to my 07  impreza. 

It has one 2-wire reluctor cranksensor, two 3-wire hall intake camsensor also as vvt sensor, two 2-wire reluctor exhaust camsensor also as vvt sensor. It is a quad avcs model.

I have wired everything right. Ign+Inj test both ok.  It seems trigger scope also ok. But when crank , no spark.  I have follwed the article (my engine won't start) , nothing found.   I used LH intake camsensor as trigger 2 at the beginning , then I tried to use RH intake camsensor as trigger 2, trigger scope inverted , but all failed.

So, can you please help me find what was wrong. Thanks.

 

attached files

ej205.pclx TriggerScopeLog LH.llgx TriggerScopeLog RH.llgx

[Adamw]

Crank sensor is wired back to front, swap the +/- wires at the sensor.  

Use EJ20 Quad AVCS trigger mode with the LH cam connected to trig 2.  

[zouyiyu]

Thanks , it worked.

6 hours ago, Adamw said:

Crank sensor is wired back to front, swap the +/- wires at the sensor.  

Use EJ20 Quad AVCS trigger mode with the LH cam connected to trig 2.  

Thanks a lot.