Simon B Posted September 16, 2021 Report Share Posted September 16, 2021 Finishing up my A loom on a storm, the cam position sensor has 3 pins however trigger 2 cable (grey) only has the 2, red and white, plus the shielding but that doesn't fix at the sensor end. does anyone know where the 3rd pin goes or needs, even better in what order the pins are on the sensor itself? Rover 4.6, p38 Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 16, 2021 Report Share Posted September 16, 2021 If it looks like below, connect the sensor red to the Storm 8V pin (red/white wire in our loom). Connect sensor green to trig 2 (red inside the grey shielded cable). Connect sensor black to the white wire inside the grey shielded cable. Quote Link to comment Share on other sites More sharing options...
Simon B Posted September 16, 2021 Author Report Share Posted September 16, 2021 6 minutes ago, Adamw said: If it looks like below, connect the sensor red to the Storm 8V pin (red/white wire in our loom). Connect sensor green to trig 2 (red inside the grey shielded cable). Connect sensor black to the white wire inside the grey shielded cable. Great, thank u Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.