YBUYV8 Posted September 18, 2021 Report Share Posted September 18, 2021 Hi There. What is the process of adding extra channels or changing current channels on Link MXG 1.2 strada dash? I am wanting to display my trans temp and pressure on my dash? Thanks in advance Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 18, 2021 Report Share Posted September 18, 2021 Its a bit complicated to explain CAN fundamentals in a short post. If you attach your dash and ecu config I will be happy to set it up for you. Quote Link to comment Share on other sites More sharing options...
YBUYV8 Posted September 18, 2021 Author Report Share Posted September 18, 2021 Cheers Adam MXG 1.2 Strada.zconfig Brad G4+ Fury.pclr Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 19, 2021 Report Share Posted September 19, 2021 What ECU CAN port is the dash connected too? You have the MXS stream set up on both CAN 1 & CAN 2. Quote Link to comment Share on other sites More sharing options...
YBUYV8 Posted September 19, 2021 Author Report Share Posted September 19, 2021 CAN 2. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 19, 2021 Report Share Posted September 19, 2021 Files attached. The .xc1 file you dont actually need for the dash config to work, but you can import it into the CAN protocol builder in RS3 if you want to see how it is done or add anything else in future. BradG4Fury new CAN.pclr LINK_YBUYV8 custom_@20210919_214951_007247.xc1 YBUY V8.zconfig Quote Link to comment Share on other sites More sharing options...
YBUYV8 Posted September 19, 2021 Author Report Share Posted September 19, 2021 Thank you. Legend! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.