Jump to content



Recommended Posts



I have a link G4 pnp for my 1989 MX5. I was reconfiguring some wiring and moved a fuel pressure sensor I had from Volt 5 on one of the expansion connectors, to volt 9 on the other. I could not get this to work with my ecu until I configured the fuel pressure sensor as voltage input 11 on the G4 software. As far as the manual shows, there is no volt 11 input on this ecu? Is there a known mapping for these inputs that is different from what is written on the PCB to what should be selected in the software?





Link to comment
Share on other sites

Yeah I just looked at the PCB drawing and there is definitely a mistake in the silk screen there, although it doesnt match what you are saying.  My drawing shows the exp pin marked AN Volt 9 is actually connected to AN Volt 10, and the exp pin marked AN Volt 10 is connected to AN Volt 11.


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...