armog Posted September 29, 2021 Report Share Posted September 29, 2021 Trying to figure out what settings to use on a na+t ka24de using g4x monsoon. have it set as 360 optical with distributer trigger 1 optical/hall on rising trigger 2 optical/hall on all trying to attach the map but im limited by file size and dont know how to clear out previous attachments. Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 29, 2021 Report Share Posted September 29, 2021 Those would be the correct settings I expect. Does it not work? You can use dropbox, google drive or one drive or similar to share any file. armog 1 Quote Link to comment Share on other sites More sharing options...
armog Posted September 29, 2021 Author Report Share Posted September 29, 2021 https://drive.google.com/drive/folders/15VC4pbfrJyS-ye5OexkA1VOgkbHbm2eJ?usp=sharing Quote Link to comment Share on other sites More sharing options...
Adamw Posted September 29, 2021 Report Share Posted September 29, 2021 What's the question? The trigger signal looks ok. Without knowing if there is a problem or not, the first thing I would suggest regardless is do a firmware update, your map shows this ecu is on very old firmware. Quote Link to comment Share on other sites More sharing options...
armog Posted September 29, 2021 Author Report Share Posted September 29, 2021 Question was if not the trigger settings are correct for the application. Had an issue with the dizzy arcing out with an ignition test, replaced dizzy and we have no spark so I'm going to be inspecting the wiring and go from there. Will update firmware and update. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.