BHPerformance Posted October 18, 2021 Report Share Posted October 18, 2021 Would it be possible to activate the CE Light when the ect temp gets to certain level so say 110c i know we can lower RPM but wanted it to turn on a light on dash as well car in question is a suzuki swift has can dash and the water temp gauge works but it not that accurat. Only way i could think is check raw voltage at 110c in live readings and set that to the error high voltage Quote Link to comment Share on other sites More sharing options...
Adamw Posted October 19, 2021 Report Share Posted October 19, 2021 Set a virtual aux to CE light. Set the Aux that controls the dash lamp to GP output and give it OR conditions like below. The lamp will illuminate when ECT is above 110 OR the CEL is active Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.