EricW Posted January 22, 2013 Report Share Posted January 22, 2013 I've been hearing something that I would like to get confirmation on as it's not documented. When ALS is enabled (or rather, cyclic idle is activated), knock control is not functional? I can understand that it would not be functional when ALS is firing, but that would be in a scenario that the knock logic would be off normally as the TP is below the threshold for knock detection. Say, the scenario is with GrpN with the throttle jacked: - Throttle jacked 12% - Cyclic idle low: 13% - Cyclic idle high: 15% - Cyclic idle limit: 1500 Is it possible to set the following knock settings and have it still work? - TP Low Lockout :16-18% - RPM Low Lockout: 1700 RPM - TP Delta: 5% Or does the vipec just ignore knock control when running with ALS enabled? Quote Link to comment Share on other sites More sharing options...
Simon Posted January 30, 2013 Report Share Posted January 30, 2013 What you are looking at there should be fine to do. No reason knock can not be used even with anti lag. If you set it how you have suggested it will only be active when anti lag is not. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.