WillM Posted January 26, 2013 Report Share Posted January 26, 2013 I'm using VTS Version 4.9.3.1194. For the life of me, I cannot find where to set and configure the "General Purpose Timers". There is some setup information about Timers in VTS online help, however the help file does not say where the Timers are located in the ECU Settings window. Where are the Timers? Are they only available when connected to the ECU? I'm working offline. Thanks, Will Quote Link to comment Share on other sites More sharing options...
Dave Kriedeman Posted January 26, 2013 Report Share Posted January 26, 2013 Hi there, Timers 1 and 2 can be found under the Auxillary Outputs tab. When you open that tab they are at the bottom of the list below Virtual Auxillaries 1,2 and 3. Regards Dave. Quote Link to comment Share on other sites More sharing options...
WillM Posted January 28, 2013 Author Report Share Posted January 28, 2013 Thank you for the response...but the Timers are not there on my VTS install. I'm running the lastest version of VTS, but haven't updated the firmware in a couple of seasons. Now that I know where the TImers are supposed to be, and that they aren't there, I'm guessing that to access the Timers I need to update the firmware. Correct? Thanks, Will Quote Link to comment Share on other sites More sharing options...
Simon Posted January 28, 2013 Report Share Posted January 28, 2013 Yep the firmware will need to be a version that supports the timers for them to visible. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.