sokratis Posted February 9, 2022 Report Share Posted February 9, 2022 Hello , i have an rtd egt sensor connected to an temp 3 and i can't make it work. First i am confused if i have choosen correctly an temp or i should connect it somewhere else... second i don't use an amplifier as i read that for egt rtd isn't necessary...any help i would appreciate Thanks a lot Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 9, 2022 Report Share Posted February 9, 2022 Yeah AN Temp 3. From memory the cal table of RTD EGT in G4+ was a little odd scaling. Can you attach a copy of your tune. Is it the AEM RTD? Quote Link to comment Share on other sites More sharing options...
sokratis Posted February 9, 2022 Author Report Share Posted February 9, 2022 No it is an egt frrom a diesel...i tried a lot numbers and the egt number isn't changing i don't know what to do ... I measured 4.6v both in input and output , is this wrong? Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 9, 2022 Report Share Posted February 9, 2022 Whats the resistance of the sensor at room temp? Does resistance increase when you warm in up with a cigarette lighter or similar? Quote Link to comment Share on other sites More sharing options...
sokratis Posted February 9, 2022 Author Report Share Posted February 9, 2022 I don't know, i will try Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.