Damien Posted February 17, 2022 Report Share Posted February 17, 2022 hello to all, small question I have just finished temporarily connecting my G4X XtremeX computer I am in the middle of configuring the computer for a prototype with honda k20 engine. I Loaded the setup for the k20 to get an idea of the basic configuration. when I changed the water and air temperature analog input, it gave me an error message. what I did not have before without taking the base of the setup. Nothing serious I said to myself I will reset the box and start my own setup, but even reset the two water and air temperature error codes Rest I tried to erase them but they come back instantly I don't understand why Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 17, 2022 Report Share Posted February 17, 2022 Attach your map. Quote Link to comment Share on other sites More sharing options...
Damien Posted February 18, 2022 Author Report Share Posted February 18, 2022 Thank you Adam, I erased the default codes from the log, but not in the ecu Quote Link to comment Share on other sites More sharing options...
Adamw Posted February 18, 2022 Report Share Posted February 18, 2022 Sorry, it is not clear what you mean. Do you still have a problem or not? If so you need to attache your tune. Quote Link to comment Share on other sites More sharing options...
Damien Posted February 20, 2022 Author Report Share Posted February 20, 2022 yes. my problem is solved during your first answer thank you. sorry for my bad english Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.