Steve Bull Posted March 10, 2022 Report Share Posted March 10, 2022 My wiring is a bit of a state, looks like a snakes wedding. I've seen that ECU Master make a small CANBUS controler does this work with the Link G4x extreme. Not sure how it can be set up though. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 10, 2022 Report Share Posted March 10, 2022 Yes, there are instructions in the help file. Mcfly94 1 Quote Link to comment Share on other sites More sharing options...
Mcfly94 Posted March 13, 2022 Report Share Posted March 13, 2022 Can confirm it also works with G4+, An Volt Stream settings are a bit odd had to use a divider of 100 and offset of 10000 to get working with V3 board. ID 1600 is your analogue inputs on the board ID 1602 is digital inputs on the board ID 1603 is your outputs if your using them Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.