DwreckTheHinga Posted March 11, 2022 Report Share Posted March 11, 2022 I’ve been able to set up every item on my dash… but somehow can’t get the GPS speed to display. The channel exists, and I can select it- then I have gps speed selected in the menu- but it makes no difference. At this time I don’t care if it will or will not transmit to the ECU. It’s currently plugged into the back of my dash, but no readings. This is a newer build, so it never worked. Sorry this isn’t the most detail oriented post- I’m not currently near the car to really add much more. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 11, 2022 Report Share Posted March 11, 2022 I’m not at a dash now, but if you push the view button (bottom right from memory) on the dash several times to cycle through your pages, after the last page you will reach the gps page. This will show status and how many satellites it can see etc. Quote Link to comment Share on other sites More sharing options...
DwreckTheHinga Posted March 12, 2022 Author Report Share Posted March 12, 2022 I see “GPS & Tracks” Once I select that it only shows “all tracks manager” Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 12, 2022 Report Share Posted March 12, 2022 Wrong area by the sounds. Press the view button until you get to the GPS status page. Video below, our dash is an older one but Im pretty sure the 1.2 strada menu is mostly the same https://1drv.ms/v/s!AiYbYlZQuRHPyD7ykUMmecRAHaXG?e=OG3gdI Quote Link to comment Share on other sites More sharing options...
DwreckTheHinga Posted March 12, 2022 Author Report Share Posted March 12, 2022 There is no function when I press the “view/quit” button. The page does not change at all. Quote Link to comment Share on other sites More sharing options...
Adamw Posted March 13, 2022 Report Share Posted March 13, 2022 Ok, maybe the MXG is different. How about connect RS3 and go to the connected devices screen. You should see some GPS status in there somewhere - not sure if on the live measures tab or one of the others. Sorry I dont have an MXG in my office to test. Also check the firmware version while you are in there. Quote Link to comment Share on other sites More sharing options...
DwreckTheHinga Posted June 8, 2023 Author Report Share Posted June 8, 2023 After rage quitting on getting this to work- I'm back, and I really want this shit to work. I've tried plugging the GPS into the back of the dash, and into the ECU, neither will show me any live data for GPS either through the MXG1.2 Strata or the RS3. Is it possible the GPS I received was just DOA at this point, cause this really doesn't make any sense to me, otherwise. Quote Link to comment Share on other sites More sharing options...
DwreckTheHinga Posted June 8, 2023 Author Report Share Posted June 8, 2023 Also RS3 and MXG are currently on the latest versions. No change. Quote Link to comment Share on other sites More sharing options...
DwreckTheHinga Posted June 12, 2023 Author Report Share Posted June 12, 2023 Welp- I was right. The unit was DOA. When I pushed the "view" button previously nothing would show. I plugged in a brand new unit and pressed "view" and the GPS tracker came up. Pretty frustrating situation. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.